Bellator Plate Carrier

Cost * One time charges may apply
Starting at: $199.99

Bellator Plate Carrier
Bellator Plate Carrier Bellator Plate Carrier Bellator Plate Carrier Bellator Plate Carrier Bellator Plate Carrier

Please Choose:

Cumberbund Armor

* One time charges may apply


This carrier is adjustable to fit within following ranges for both Men & Women

Chest Measurement 38-40" 42-44" 46-48" 50-52"
Viper MOPC
I do not fit this size

      Infidel Body Armor 10x12 Bellator Made in the USA  Composite Level IV


Made in the USA Plate carrier:

  • Fits M-XL
  • Water Resistant
  • MOLLE webbing on inside of cummerbund for attaching side plates (side utility pouch required)
  • Berry Compliant (made from start to finish with American-made materials)
  • 92 weight thread
  • Accomodates 10x12 plates front and back (will not accept ESAPI)
  • Accomodates 6x6 side plates (MOLLE side plate utility pouch required)
  • Mil-spec 1000D Cordura
  • Closed cell foam pads (no odor)
  • Duragrip hook & loop
  • Shoulder pads have loops for equipment and/or hydration tube
  • Includes plate carrier pad (not shown)
  • Made in USA

Choose Level IIIa, Level III, or Level IV

Level IIIa Stops: .44 Magnum, 9mm FMJ, 7.62x25, 5.7x28, .50AE and other specialty pistol rounds and provide up to 40% blunt trauma reduction when worn in conjunction with a rifle plate.  Knife resistant to both stabs and slices. Besides being light (under 1 lbs), these inserts are soft and comfortable and just over 1/4" thick. They are made of Kevlar KM2 and Goldflex II for really good stopping power for fragments and point blank shots and are thinner and lighter than standard Kevlar. 

Level III Stops:  5.56 (M855, M193); 7.62x39 (Ball), 7.62x54R (LPS), 7.62x51 (Ball); 30-06 (JHP, FMJ); .357 mag; .45 cal; 50 cal Beowulf; 9mm; 12 Gauge Shotgun slugs, and more.  All of these rounds were fired from semi-auto AR-15s, AK-47s, MAK-90s, bolt action Rifles, Glocks, Revolvers, and pump shotguns.  This is a level III+ plate as tested by HP White, a certified NIJ Laboratory.Complies with MIL-46100 Rev E. for class 1 armor and passed the test against a 30 Caliber Armor Piercing bullet at 2426 fps as tested at the US Army Aberdeen Test Center.  Weight for 10x12 single curve with 1/4" polyurea anti-frag coating is 9lbs.

Level III+ Lightweight Stops:  5.56 (M855, M193); 7.62x39 (Ball), 7.62x51 (Ball); .357 mag; .45 cal; and common handgun rounds as well as shotgun slugs and buckshot.  This is a level III+ plate as tested by Chesapeake Testing Laboratory.  Complies with NIJ-STD-0101.06.  Laboratory tested to stop the M855 and the M80.  Weight is approximately 4.5 pounds.  This is a Multicurve plate similar to ESAPI, but slightly different in dimensions (10x12").

Level IV Stops: Everything Level III stops PLUS Armor Piercing, including: 5.56 (M193, M855, SS109); 7.62x39 (Ball,Steel Core/Armor Piercing Incendary (API)), 7.62x51 (Ball), 7.62x54R (L/LPS/B-32 (API)), 7.62 x 63 (JSP/AP M2) plus all pistol rounds and lesser rifle rounds.  All fired from M-1, SVD Dragunov, FN FAL, AK-47, AR-15. 

10x12 single curve = 7.72lbs.; ESAPI Medium = 7.9lbs; ESAPI Large = 9.17lbs

This plate is multi-hit rated up to 20 hits against an AR-15 M855.  This plate is NIJ Certified and we are listed on the NIJ Compliant Armor list. 

Side plates are available in Level III & IV.  Price for side plates includes the required side plate utility pouches. 

*The Bellator does not accept: BALCS or Multi-Curve or SAPI/ESAPI armor.

Customer Reviews:

Displaying 7 to 11 (of 11 reviews)

[<< Prev]   1  2 
Date Added: 09/20/2014
Completely adjustable for any size. You can make it fit like a glove. Doesn't look or feel like a trash bag, like some other plate carriers. Stylish, your social life will improve as girls will love to see you wear it. I'm ordering another for my son...maybe he'll get a girlfriend.

Rating: 5 of 5 Stars [5 of 5 Stars]

by Jim, 1LT Ret
Date Added: 09/12/2014
Just received this and very pleased. I am learning. I thought the side plates would fit in the cummerbund but come to understand that separate pouches are necessary for the steel side plates. ( I have 6"x8" side plates. ) I did see that the cummerbund does have a Velcro pocket.....seems this would be excellent for a soft armor ( IIIa ) side plate to be inserted in the cummerbund. Yes or no? The quality of this plate carrier is excellent. Fits well. Well designed and sewn and looks great. Easy to use and adjust. Many thanks to infidel Body Armor......first class people! JLP, Former 1LT, US Army Vietnam 1968-69

Rating: 5 of 5 Stars [5 of 5 Stars]

Date Added: 07/19/2014
Slightly heavy but very high quality. I'll take quality over weight any day.

Rating: 4 of 5 Stars [4 of 5 Stars]

by Antonio
Date Added: 07/07/2014
Awesome product and very fast shipping!! Would definitely do business with again

Rating: 5 of 5 Stars [5 of 5 Stars]

by Mustang
Date Added: 07/03/2014
I am trusting Infidel with my life. If I did not be leave in Infidel body armor I would not buy it. Why should the military get all the good stuff...

Rating: 5 of 5 Stars [5 of 5 Stars]

Displaying 7 to 11 (of 11 reviews)

[<< Prev]   1  2